GPS Tracker Commands

GPS Tracker Basic Setup (TK102B / TK103 / TK104)

  • Please fully charge the battery before its first use.
  • Use only standard size SIM Card. Insert the SIM card- wait for 45 - 60 sec until the green LED start blinking.
  • Please do NOT use any 3rd party application (iPhone/Android app) to configure the GPS tracker.

GPS Tracker - APN setup

To set the APN send an SMS command to the GPS Tracker: Command format: apn

If the GPS tracker has password 123456 and network APN is "internet", then the SMS command would be: apn123456 internet

GPS tracker as a voice surveillance device!

GPS tracker can be a voice activated surveillance audio monitor. Most GPS trackers (TK102, TK103, TK104 series) are sophisticated devices that people can use as a -
  • GPS Tracker or
  • GPS Data logger or
  • Voice surveillance device or
  • SOS emergency device AND/OR
  • Shock sensor etc.
You can get the real-time location info simply dialing the tracker number but sometime you may need to hear the conversation around the mini GPS tracker. Send an SMS command: monitor123456
Where 123456 is your device password.

Activate Geo-fence - additional security from a GPS tracker

Activate Geo-fence GPS tracker

Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the
message to the authorised numbers when it breaches the district.

To set up: when the GPS tracker stays immobile in a place for around 3 to 10 minutes, the user can an send the following SMS command to the tracker to activate geo-fence.
“STOCKADE+PASSWORD+SPACE+LATITUDE,LONGITUDE; LATITUDE,LONGITUDE”

Subscribe to RSS - GPS Tracker Commands